SEW PD-28 HIGH VOLTAGE PROBE 40kVDC-28kVAC

SEW Logo

SEW PD-28 High Voltage Probe (40kV DC or 28kV AC)
  • Measures both AC and DC voltages with digital multimeters that have a 10 MΩ input impedance (similar to the FLUKE 80K-40)
  • Is typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.
  • Intended for low energy applications only.
  • Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.

Authorised Australian Distributor

PDF Logo    SEW PD-28 Datasheet
If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: SEW PD28 Category: Tags: , ,
SEW PD-28 High Voltage Probe (40kV DC or 28kV AC)

The SEW PD-28 high voltage probe is designed to extend the voltage measuring capability of an AC/DC voltmeters to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe stated accuracy is when used with a voltmeter having 10 Megohm input impedance.

The probe is a precision 1000:1 voltage divider that is formed by two matched resistors. The unusually high input impedance offered by these resistors minimizes circuit loading and optimises measurement accuracy. A special plastic body houses the divider and provides the user with isolation and protection from the voltage being measured

  • Measures both AC and DC voltages with digital multimeters that have a 10 MΩ input impedance.
  • Is typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.
  • Intended for low energy applications only.
  • Lightweight and rugged. 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.
Input impedance 1000 MΩ
Attenuation ratio 1000 : 1
Accuracy DCV (0 ~ 20kV) ± 1%,
DCV (20kV ~ 40kV) ± 2%,
ACV (0 ~ 28kV) typically ± 5% at 50/60 Hz
Max. working voltage 40kV DC or 28kV AC
Operating temperature 0°C ~ 40°C
Storage temperature -10°C ~ 50°C
Cable length 1 m
Weight Approx. 260g
Safety standards EN 61010-1, EN 61010-031, EN 61326-1
Weight .5 kg

Reviews


There are no reviews yet.

Be the first to review “SEW PD-28 HIGH VOLTAGE PROBE 40kVDC-28kVAC”