Reed R8800 Current-Voltage Loop Calibrator

reed logo red

This Reed R8800 Current-Voltage Calibrator simulates a transducer or measure the current flow in a transducer loop. Reed R8800 can works in the source mode, calibrate meters, thermocouple indicators, data loggers, for signal injection, semiconductor characterization, or as a backing off source.

REED R8800 Features

  • Measure and calibrate current signals
  • Provides a precise current and DC mV source
  • Able to power or measure a 2-wire current loop
  • Drives loads up to 500Ω
  • LCD display with a maximum of 1999 counts
  • Includes test leads and battery

PDF   REED R8800 Instruction Manual

Authorised Australian Distrinutor

CE logo

1 Year Warranty

If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: Reed R8800 Category: Tags: , ,

REED R8800 Specifications

  • SOURCE & MEASUREMENT
    Current Range: 0 to 19.99mA; 0 to 24mA
    Resolution: 0.01mA; 0.1mA
    Accuracy: ±(0.25% f.s. + 1 dgt.); ±(0.5% f.s. + 1 dgt.)
  • DC mV SOURCE
    Voltage Range: -199.9mV to +199.9mV
    Resolution: 0.1mV
  • Accuracy: ±(0.25% f.s. + 1 dgt.)
    GENERAL
    Display: LCD, max. 1999 counts
    Power Supply: Single 9V battery
    Dimensions: 150 x 70 x 40mm
    Weight: 232 g
    Sampling Time: Approx. 0.4 second
    Operating Temperature: 0 to 50°C (32 to 122°F)
    Operating Humidity: < 70% RH

REED R8800 Battery Replacement When the batteries become exhausted or drop below the operating voltage, “BAT” will appear in the left-hand side of the LCD display. 1. Disconnect the test leads from the meter. 2. Open the battery door by loosening the screw using a Phillips head screwdriver. 3. Insert the battery into battery holder, observing the correct polarity. 4. Put the battery door back in place. Secure with the two screws.

Reviews


There are no reviews yet.

Be the first to review “Reed R8800 Current-Voltage Loop Calibrator”