GW Instek PPH-1503 Programmable High Precision Linear DC Power Supply

http://rankingsolutions.com/?ilminec=%D8%AB%D9%86%D8%A7%D8%A6%D9%8A-%D8%A7%D9%84%D8%AE%D9%8A%D8%A7%D8%B1-%D8%A7%D9%84%D9%8A%D9%88%D9%86%D8%A7%D9%86%D9%8A%D8%A9&b5d=24 GwInstek_logo_index

يمكنك محاولة هنا The GW Instek PPH1503 is a high-speed and high-precision DC Power Supply with dual range of 15V/3A or 9V/5A. The PPh-1503 is exclusively designed to meet low power consumption requirements and users’ demands of accuracy, speed and resolution of both voltage and current.

اخبار السعودية مباشر Circuits are designed with swift response capability to provide a stable voltage output while experiencing load changes. For example, when switching cellular phone from standby to talk mode, the current consumption will be dramatically changed within milliseconds. When load current exceeded current limit, two operational modes: Limit and Trip can be selected. Under limit mode, PPH-1503 will automatically switch to constant current (CC) mode. Under Trip mode, voltage output will automatically turn off.

Authorised Australian Distributor

pdf_sml    PPH-1503 Datasheet

pdf_sml    PPH-1503 Brochure

pdf_sml    PPH-1503 User Manual

اذهب الى هنا  

انتقلت الى هنا  

If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.

اخر اخبار الاسهم The GW Instek PPH-1503 Programmable High Precision Linear DC Power Supply is designed to provide fast response to the current change for recovering the output voltage at a minimum variation. The high sampling rate allows fast feedback in voltage and current measurement to expedite products’ testing speed, which is able to increase the test throughout production. Sink function can be used to test the battery charger of portable devices. The high precision performance of PPH-1503 provides the measurement capability in low power consumption level. One built-in DVM (Digital Volt-Meter) with input ports is designed to measure any point on Device Under Test (DUT)while PPH1503 is outputting voltage and current. Besides, two ports are located on the front and rear panel which users can only select one to perform tests based upon their connection convenience. The GW Instek PPH-1503 is and ideal power source for production lines, R&D laboratories, device inspection, maintenance centers or facilities with the requirements of a swift and precise power supply with DVM.

GW Instek PPH-1503 Features:

  • Dual Range Output (0-15V/0-3A) or (0-9V/0-5A) 45 W
  • 3.5 Inch TFT LCD Display
  • Constant Voltage and Constant Current Operation
  • Built-in DVM Measurement Function
  • High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range)
  • External Relay Control Output On/Off
  • Sink Current Capability (Maximum:2A)
  • Digital Panel Control
  • Selectable Output and Input (DVM) Ports From Front or Rear Panel
  • Key Lock Function
  • 5 Sets of Preset Memory Including Power Output ON/OFF States
  • High Speed Transient Recovery Time(<40us within 100mV ; <80us within 20mV)
  • OVP/OCP/OTP Protection to Prevent DUT Damage
  • Standard Multiple Interfaces: USB / LAN /GPIB
  • Labview Driver and PC Remote Control Software
DC GENERAL MEASUREMENT TIME CHOICES 0.01 ~ 10PLC1,0.01PLC/step
AVERAGE READINGS 1~10
TYPICAL READING TIME2,3 31ms
DC VOLTAGE OUTPUT
(23℃±5℃)
OUTPUT VOLTAGE 0~15V
OUTPUT ACCURACY ± (0.05%+10mV)
PROGRAMMING RESOLUTION 2.5mV
READBACK ACCURACY3 ± (0.05%+3mV)
READBACK RESOLUTION 1mV
OUTPUT VOLTAGE RISING TIME 0.15ms (10% ~ 90%)
OUTPUT VOLTAGE FALLING TIME 0.65ms (90% ~ 10%)
LOAD REGULATION 0.01%+2mV
LINE REGULATION 0.5mV
STABILITY4 0.01%+0.5mV
RECOVERY TIME(1000%LOAD CHANGE) <40us (<100mV)
<80us (<20mV)
RIPPLE AND NOISE5 1mV rms(0~1MHz)
8mVpp(20Hz~ 20MHz)
DC CURRENT
(23℃±5℃)
OUTPUT CURRENT 0 ~ 5A (0 ~ 9V)
0 ~ 3A (9 ~ 15V)
SOURCE COMPLIANCE ACCURACY ±(0.16%+5mA)
PROGRAMMED SOURCE RESOLUTION 1.25mA
READBACK ACCURACY3 5A range: ±(0.2%+400uA)
5mA range: ±(0.2%+1uA)
 READBACK RESOLUTION 5A range: 100uA
5mA range: 0.1uA
CURRENT SINK CAPACITY 0 ~ 5V: 2A
5 ~ 15V:(2A derate 0.1A)/V
LOAD REGULATION 0.01%+1mA
LINE REGULATION 0.5mA
STABILITY4 0.01%+50uA
DVM INPUT VOLTAGE RANGE 0 ~ 20VDC
INPUT IMPEDANCE 10Ω
MAXIMUM INPUT VOLTAGE -3V, +22V
READING ACCURACY3 ± (0.05%+3mV)
READING RESOLUTION 1mV
PULSE CURRENT MEASUREMENT TRIGGER LEVEL 5mA ~ 5A, 5mA/step
HIGH TIME/LOW TIME/AVERAGE TIME 33.3us to 833ms, 33.3us/step
TRIGGER DELAY 0 ~ 100ms,10us/steps
AVERAGE READINGS 1 ~ 100
LONG INTEGRATION PULSE TIMEOUT 1S ~ 63S
LONG INTEGRATION MEASUREMENT TIME 850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO time 16.7ms/steps(60Hz), 20ms/steps(50Hz)
LONG INTEGRATION TRIGGER MODE Rising, Falling, Neither
OVP OVP RANGE OFF,ON (0 ~ 15.2V)
RESOLUTION 10mV
ACCURACY 50mV
Others PROGRAMMING IEEE-488.2(SCPI)
USER_DEFINABLE POWER_UP STATES 5 sets
REAR PANEL CONNECTOR 8Pin:output*4, sense*2, DVM*2
TEMPERATURE COEFFICIENT 0.1* specification/ ˚C
POWER CONSUMPTION 150VA
REMOTE/LOCATION CONNECTOR USB/GPIB/LAN
RELAY CONTROL CONNECTOR 150mA/15V  5Voutput, 100mA
Insulation Chassis and Terminal 20MΩ or above (DC 500V)
Chassis and AC cord 30MΩ or above (DC 500V)
Operation Environment Indoor use, Altitude: ≤ 2000m
Ambient temperature: 0 ~ 40°C
Relative humidity: ≤ 80%Installation category: II, Pollution degree: 2
STORAGE Environment TEMPERATURE: -20˚C  ~ 70˚C
HUMIDITY: < 80%
INPUT POWER 90-264VAC, 50/60Hz 6
Accessories CD 8cmUser manual x1, Quick Start manual x1
Test lead GTL-117 x 1, GTL-203A x 1, GTL-204A x 1
Dimensions 222 (W) x 86 (H) x 363 (D) mm
Weight Approx. 4.2kg
 Remarks
  1. PLC=PowerLineCycle, 1PLC = 16.7ms for 60Hz operation, 20ms for 50Hz operation;
  2. Display OFF, Speed includes measirement and binary data transfer out of GPIB;
  3. PLC=1;
  4. STABILITY:Following 15 minute warm-up, the change in output over 8 hours under ambient temperature, constant load, and line operating conditions;
  5. The ground ring of the probe is pressed directly against the output ground of the power supply and the tip is in contact with the output voltage pin.
  6. Auto detected at power-up;