FLIR CM82 600A Power Clamp Meter with VFD Filter.

 FLIR-Approved-Supplier-TM-small

The FLIR CM82 is an industrial-grade power clamp meter engineered with advanced power analysis and variable-frequency drive (VFD) filtering functions required by electrical troubleshooters.

Authorised Australian Distributor

 

 

If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: FLIR CM82 Categories: , Tags: , ,

FLIR CM82 600A Power Clamp Meter with VFD Filter.

Industrial-Grade Power Clamp Meter Tackles Noisy VFD Jobs
Discover the FLIR CM82, a powerful 600A AC/DC clamp meter that offers advanced power analysis functions which adds confidence when making measurements in environments where loads are using switching electronics such as variable frequency drives (VFDs) and today’s growing range of high efficiency lighting options. Designed by leaders in innovation at FLIR Systems, the durable power clamp gets you results on tough jobs. In addition to True RMS current and voltage measurements, the CM82’s VFD Mode leverages a low-pass filter that ensures accuracy even when distorted waveforms exist on electronic loads (such as VFD-controlled equipment). Power quality testing and load studies (to plan for future system-wide capacity) demands essential power measurement capabilities that set the FLIR CM82 power clamp meter apart from other test equipment. Measure power up to 600kW as well as Total Harmonic Distortion and harmonics to the 25th harmonic helping you find problems that could cause the malfunctioning, damage or failure of important components. The fast-responding in-rush current mode enables the meter to display the highest current reading in the first 100 milliseconds after the trigger point. This capability is ideal for getting to the root cause of nuisance tripping, spurious resets and transients.

A Brighter Idea
The FLIR CM82 delivers on the value of added safety with a built in Non-Contact Voltage Detector and a built-in worklight. The non-contact voltage detector allows you to quickly and conveniently check for voltage prior to attaching the clamp meter’s test leads to the device under test—all without reaching for a separate voltage pen. This clamp meter also features a super-bright, dual-LED worklight that illuminates dark or poorly-lit work areas without the use of a flashlight. This built-in light not only frees up a hand, adds confidence when performing visual inspections (for wear, pitting, dirt, corrosion and dust) and makes it easier to read faded labels and other markings. For peace of mind, FLIR backs up its durable clamp meters with a limited lifetime warranty.

About the CM82
With its rugged design, the FLIR CM82 clamp meter offers both safety and versatility without compromising high performance. Take the CM82 amp probe on every job as it delivers with advanced meter functions including True RMS accuracy, VFD filter mode, Power Quality Mode (THD, harmonics, watts, phase rotation) AC/DC current and voltage measurement, resistance, capacitance, frequency, diode-test, and continuity check. Use the fast-responding peak hold function to capture inrush currents and transients. The 4-digit, 4,000 count display is LED-illuminated making it bright and easy to read from anywhere. Several one-button functions including data hold, min/max, and selectable auto- or manual-ranging. A relative function helps you “zero out” the meter. The large 1.45″ (37mm) jaw opening handles conductors up to 1000 MCM. The FLIR CM82 amp clamp has a CAT IV-600V, CAT III-1000V overvoltage safety rating. NIST certification is available for this product.

TECHNICAL SUMMARY CM82 BASIC ACCURACY
AC/DC Current 600A ±2%
AC/DC Voltage 1000V ±1% / 0.7%
AC VFD Voltage 1000V ±1%
Harmonics 1st-25th Order ±5%
Total Harmonic Distortion 0.0 to 99.9% ±3%
Inrush Current 600ACA ±3%
(Integration Time 100ms)
Active Power 10kW to 600kW ±3%
(10V, 5A min)
Diode Test 0.4 to 0.8V ±0.1V
Capacitance 3.999mF ±1.9%
Resistance 99.99kΩ ±1%
Continuity Threshold 30Ω ±1%
Frequency 20.00Hz to 9.999kHz ±0.5%
Bluetooth Range Max
Jaw Opening 1.45in (37mm, 1000MCM)
Category Rating CAT IV-600V, CAT III-1000V
Battery Type 6 x AAA
Warranty Limited Lifetime*Lifetime Coverage is defined by the greater of whichever condition below applies:

  • Seven (7) years after product is no longer made by FLIR
  • Ten (10) years from date of purchase

 

Weight 1 kg

Reviews


There are no reviews yet.

Be the first to review “FLIR CM82 600A Power Clamp Meter with VFD Filter.”