Extech VPC300 Video Particle Counter with built-in Camera

Extech logo

Measure up to 6 Channels of Particle Sizes plus Air Temperature and Relative Humidity

The Extech VPC300 is a Video Particle Counter with built-in Camera. Measures up to 6 channels of particle sizes plus air temperature and relative humidity. Used for capturing videos and photos that are stored onto internal memory or a micros card. The VPC300 can measure up to 6 channels of particle sizes plus air temperature and relative humidity.

Microscopic fragments of mold or other airborne particles can be inhaled causing health impacts, so sampling the air during and after mold cleanup may make sense to determine how effective the process has been at removing or containing these contaminants. Restoration professionals sometimes use a particle counter to determine the level of airborne particles. Use the included software to generate reports with videos, photos and data points. Complete with NIST-traceable calibration certificate, Universal AC Adapter/Charger with multiple plugs, USB cable, PC software, tripod, filter, 7.4V NiMH battery and a hard, protective case.

CE    1 Year

PDF Logo    VPC300 datasheet
PDF Logo    VPC300 User Manual


If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: Extech VPC300 Categories: , , Tags: , ,

Using the Extech VPC300 – Particle Counter Considerations

Particle pollution is a mixture of various components including smoke, dust, chemicals, mold, and gases. Particle concentrations can affect our health and comfort levels.  Evaluating the quality of the air by determining the concentration and size of these particles can help to determine if a problem exists.  Locating the source of these various particles can help to determine effective methods of reducing these and improving the Indoor Air Quality (IAQ).

One way to determine the source of air particulates in a room is to test the air outside of the room under investigation.  Determine the concentration and size of particulates at the air intake to that room.  Purge or Zero the particle counter and then measure the concentration and size of particles in multiple areas of the room to be tested, to determine the effectiveness of the incoming air filtration.  The air temperature, relative humidity, and CO2 levels are also an important consideration for IAQ as high humidity and lower temperatures can bring about mold creation.

If a room is classified as an ISO clean room or clean zone, the counts of particle sizes for that class cannot be exceeded when tested.    Refer to the ISO Clean Room Class chart (ISO 14644‐1:1999) for values.

The VPC300 is equipped with a still/video camera to directly see the areas under test. Data, images, and video can be stored on up to an 8GB micro‐SD card (not included) or in the meter’s internal 74MB memory.

The life of the meter can be maximized by testing only when necessary and securely storing the instrument when it is not in use. Continuous use is not recommended and can shorten the life of the instrument especially in dusty environments. Setting up a common sense maintenance schedule and testing to the schedule will go a long way in lengthening the life of the instrument sensor.

Extech VPC300 Particle Counter

Channels                                         Six channels: 0.3, 0.5, 1.0, 2.5, 5.0, 10μm

Flow Rate                                        0.1ft3/min (2.83L/min)

Counting Efficiency                         50% at 0.3μm; 100% for particles > 0.45μm Coincidence Loss           5% at 2,000,000 particles per ft3

Particle Count Modes                      Cumulative, Differential, and Concentration modes

Air Temperature and Relative Humidity Measurements

Air Temperature Range                  32° to 122°F (0 to 50°C)

Dew Point/Wet Bulb Temperature Range     32° to 122°F (0° to 50o\°C)

Relative Humidity Range               0 to 100%RH

Air Temperature Accuracy     

±0.9°F (0.5°C) 50° to 104°F (10°C to 40°C)

±1.8oF (1.0oC) all other ranges

Dew Point/Wet Bulb Temperature Accuracy

±0.9°F (0.5°C) 50 to 104°F (10°C to 40°C)

1.8oF (1.0°C) all other ranges

Relative Humidity Accuracy

±3%RH from 40 to 60%RH

±3.5%RH from 20 to 40%RH and from 60 to 80%RH

±5.0%RH from 0 to 20%RH and from 80 to 100%RH

Extech VPC300 General Specifications

Display                                    2.8” 320 x 240 pixel TFT Color LCD with backlight

Low battery indication           Battery symbol appears on the LCD

Micro‐SD Card Slot                 Accommodates up an 8GB card

Meter internal memory            5000 sample records; 74MB

Power supply                          Rechargeable 7.4V Lithium‐ion polymer battery

Battery life                              Approx. 4 hours of continuous use

Battery charge time                2 hours approx. with AC adaptor/charger

Operating Temperature          32° to 122°F (0 to 50°C)

Operating/Storage Humidity   10 to 90% RH non‐condensing

Storage Temperature               14 to 140°F (‐10 to 60°C)

Dimensions                                     9.4 x 3.0 x 2.2” (240 x 75 x 57mm)

Weight                                            1.26 lbs. (570g)


There are no reviews yet.

Be the first to review “Extech VPC300 Video Particle Counter with built-in Camera”