Extech BT100 Battery Capacity Tester
Extech BT100 Battery Capacity Tester.
Checks battery condition in seconds while the battery is in service
The Battery Tester is designed for measuring the internal resistance and output voltage of batteries including lead storage cell, nickel-cadmium battery, lithium-ion battery and nickel-metal hydride battery.
Battery Capacity Tester
The Extech BT100 Battery Capacity Tester can be used to test the condition of batteries quickly and easily. As an AC milliohmmeter, the tester measures DC voltage and AC resistance while the battery is in use, helping to save time on repetitive testing trials or large quantities of batteries.
The BT100 can store up to 999 test readings and the device can be connected to a PC using the included Windows-compatible software and data cable to analyze and document test results.
Authorised Australian Distributor
Extech Model BT100. The Battery Tester is designed for measuring the internal resistance and output voltage of batteries including lead storage cells, nickel-cadmium batteries, lithium-ion batteries, and nickel-metal hydride batteries. The Extech BT100 is shipped fully tested and calibrated and, with proper use, will provide years of reliable service. Please visit the Extech Instruments website (www.extech.com) to check for the latest version of this User Guide.
The comparator function compares the measured values with pre-set High and Low limit values for internal resistance and voltage level, and determines the range that the measurement should fall into. Then, according to the following conditions, switches ON the corresponding LED, and sounds an audible alert as shown in the table below for the WARNING and FAIL conditions.
Extech BT100 General Specifications
|Resistance Ranges||40mΩ, 400mΩ, 4Ω, 40Ω|
|Voltage Ranges||4V, 40V|
|Maximum Input Voltage||50VDC|
|Power||6 AAA batteries|
|Voltage||1 mV (0.001 V)|
|Max Voltage||40 V|
|Minimum Resistance||10 u Ohms (0.01 m Ohms)|
|Maximum Resistance||40 Ohms|
|Accuracy||Voltage: ± 0.1% Rdg + 6D; Resistance: ± 1% Rdg + 8D|
|On-line Testing without Shutting Down Battery, Simultaneously Measures Battery Resistance and Voltage|
|Additional Info/Comments||Checks Battery Condition in Seconds while the Battery is in Service|
|Dimensions||250 x 100 x 45 mm|